Schwitzke.jpg

Dr.-Ing. Corina Schwitzke

  • Institut für Thermische Strömungsmaschinen
    KIT, Campus Süd

    Geb. 30.60
    Straße am Forum 6
    D-76131 Karlsruhe

Veröffentlichungen und Tagungsbeiträge


2023
Vorträge
Oil-Jet Lubrication of Epicyclic Gear Trains
Haber, M.; Schwitzke, C.; Bauer, H.-J.
2023, Juni 29. 17th SPHERIC International Workshop (2023), Rhodos, Griechenland, 27.–29. Juni 2023
Proceedingsbeiträge
Oil-Jet Lubrication of Epicyclic Gear Trains
Haber, M.; Schwitzke, C.; Bauer, H.-J.
2023. Proceedings of the 17th International SPHERIC Workshop. Ed.: G. Fourtakas, 341–347
Zeitschriftenaufsätze
Multiscale simulation approach to predict the penetration depth of oil between chip and tool during orthogonal cutting of AISI 4140
Sauer, F.; Codrignani, A.; Haber, M.; Falk, K.; Mayrhofer, L.; Schwitzke, C.; Moseler, M.; Bauer, H.-J.; Schulze, V.
2023. (P. D.-I. P. D. B. Prof. Dr.-Ing. habil. Volker Schulze, Hrsg.) 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Prof. Dr.-Ing. habil. Volker Schulze, Prof Dr-Ing Prof Dirk Biermann, 117, 426–431. doi:10.1016/j.procir.2023.03.072
2022
Vorträge
Experimental investigation of the oil jet heat transfer on meshing spur gears
Ayan, E.; Kromer, C.; Schwitzke, C.; Bauer, H.-J.
2022, September 29. 25th Conference of the International Society for Air Breathing Engines (ISABE 2022), Ottawa, Kanada, 25.–30. September 2022
Experimental Investigation of the Oil Jet Heat Transfer for an Aero Engine Gearbox
Kromer, C.; Ayan, E.; Schwitzke, C.; Bauer, H.-J.
2022, Oktober 29. 25th Conference of the International Society for Air Breathing Engines (ISABE 2022), Ottawa, Kanada, 25.–30. September 2022
Proceedingsbeiträge
Investigation of the Transient Closing Behavior of a Radially Adaptive Seal
Lofts, J.; Schwitzke, C.; Bauer, H.-J.; Peltier, V.; Zhou, K.
2022. Proceedings of the ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. Volume 8A: Structures and Dynamics — Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Engineering Design, Analysis, and Additive Manufacturing; Fatigue, Fracture, and Life Prediction, Art.-Nr.:V08AT22A012, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-82235
Experimental investigation of the oil jet heat transfer on meshing spur gears
Ayan, E.; Kromer, C.; Schwitzke, C.; Bauer, H.-J.
2022. 25th Conference of the International Society for Air Breathing Engines
Zeitschriftenaufsätze
Experimental Investigations Into the Effect of Surface Roughness and Contact Force on Leakage Between Two Rigid Metallic Surfaces
Bricaud, C.; Schulz, O.; Zierer, T.; Peltier, V.; Schwitzke, C.; Bauer, H.-J.
2022. Journal of Engineering for Gas Turbines and Power, 144 (6), Art.-Nr. GTP-21–1690. doi:10.1115/1.4053965
Experimental Determination of Heat Transfer Coefficient on Impingement Cooled Gear Flanks: Validation of the Evaluation Method
Ayan, E.; von Plehwe, F. C.; Keller, M. C.; Kromer, C.; Schwitzke, C.; Bauer, H.-J.
2022. Journal of Turbomachinery, 144 (8), Art.-Nr.: 081008. doi:10.1115/1.4053694
2021
Vorträge
Experimental Determination of Heat Transfer Coefficient on Impingement Cooled Gear Flanks : Validation of The Evaluation Method
Ayan, E.; von Plehwe, F. C.; Keller, M. C.; Kromer, C.; Schwitzke, C.; Bauer, H.-J.
2021, Juni 9. ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT 2021), Online, 7.–11. Juni 2021
Proceedingsbeiträge
Influence of the Flow Physics on the Load Balancing During SPH Simulations
Chaussonnet, G.; Dauch, T.; Keller, M.; Okraschevski, M.; Ates, C.; Schwitzke, C.; Bauer, R. K. H.-J.
2021. W. E. Nagel, D. H. Kröner & M. M. Resch (Hrsg.), High performance computing in science and engineering ’19 : transactions of the High Performance Computing Center, Stuttgart (HLRS) 2019. Ed.: W. E. Nagel, 463–477, Springer. doi:10.1007/978-3-030-66792-4_31
Experimental Investigations Into the Effect of Surface Roughness And Contact Force on Leakage Between Two Rigid Metallic Surfaces
Bricaud, C.; Schulz, O.; Zierer, T.; Peltier, V.; Schwitzke, C.; Bauer, H.-J.
2021. Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 5B ; June 7-11, 2021, Virtual, Online, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2021-59163
Experimental Determination of Heat Transfer Coefficient on Impingement Cooled Gear Flanks: Validation of the Evaluation Method
Ayan, E.; von Plehwe, F. C.; Keller, M. C.; Kromer, C.; Schwitzke, C.; Bauer, H.-J.
2021. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, June 7–11, 2021, Virtual, Online - Volume 5B: Heat Transfer — General Interest; Internal Air Systems; Internal Cooling, GT2021–58838, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2021-58838
Experimental Investigation on the Rubbing Process of Labyrinth Seals Against Honeycomb Liners
Munz, O.; Hühn, L.; Schwitzke, C.; Bauer, H.-J.; Fischer, T.; Ulan kyzy, S.
2021. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online. Vol.: 10A: Structures and Dynamics, GT2020–15935, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2020-15935
Analytical Model for the Heat Transfer in Impingement Cooled Spur Gears
Kromer, C.; von Plehwe, F. C.; Keller, M. C.; Schwitzke, C.; Bauer, H.-J.
2021. ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online. Volume 1: Aircraft Engine; Fans and Blowers, Nr. GT2020–14760, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2020-14760
Experimental Study on the Wear-in Behaviour of Brush Seals
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2021. Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition - 2020 : presented at the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, online. Volume 7C: Heat Transfer, GT2020–14158, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2020-14158
Experimental Investigation on the Rubbing Process of Labyrinth Seals Considering the Material Combination
Hühn, L.; Munz, O.; Schwitzke, C.; Bauer, H.-J.
2021. Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition - 2020 : presented at the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, online. Vol. 10 A, GT2020–14918, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2020-14918
Zeitschriftenaufsätze
Experimental Investigation on the Rubbing Process of Labyrinth Seals Considering the Material Combination
Hühn, L.; Munz, O.; Schwitzke, C.; Bauer, H.-J.
2021. Journal of turbomachinery, 143 (11), Art.Nr. 111006. doi:10.1115/1.4051166
Analysis of Heat Flux Distribution during Brush Seal Rubbing Using CFD with Porous Media Approach
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2021. Energies, 14 (7), Art.-Nr.: 1888. doi:10.3390/en14071888
2020
Vorträge
Analytical Model for the Heat Transfer in Impingement Cooled Spur Gears
Kromer, C.; von Plehwe, F. C.; Keller, M. C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2020, September 24. ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT 2020), Online, 21.–25. September 2020
Proceedingsbeiträge
Extensive Experimental and Analytical Investigation of the Aerodynamic Flow Field of Labyrinth Seals with Innovative Liner Configurations
Hühn, L.; Wilhelm, J.; Schwitzke, C.; Bauer, H.-J.
2020. Proceedings of the 18th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC18), 23-26 November 2020 (online), Art.-Nr.: 012026. doi:10.1088/1742-6596/1909/1/012026
Heat Transfer by Impingement Cooling of Spur Gears
Kromer, C.; von Plehwe, F. C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2020. Deutscher Luft- und Raumfahrtkongress 2019, Darmstadt, 30 September - 2 Oktober 2019, Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR). doi:10.25967/490085
Zeitschriftenaufsätze
Liquid compound refractive X-ray lens
Last, A.; Gutekunst, J.; Opolka, A.; Krug, M.; Schwitzke, C.; Koch, R.; Mohr, J.
2020. Optics express, 28 (15), 22144–22150. doi:10.1364/OE.389058
Progress in the Smoothed Particle Hydrodynamics Method to Simulate and Post-process Numerical Simulations of Annular Airblast Atomizers
Chaussonnet, G.; Dauch, T.; Keller, M.; Okraschevski, M.; Ates, C.; Schwitzke, C.; Koch, R.; Bauer, H.-J.
2020. Flow, turbulence and combustion, 105, 1119–1147. doi:10.1007/s10494-020-00174-6
CFD study of oil-jet gear interaction flow phenomena in spur gears
Keller, M. C.; Kromer, C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2020. The aeronautical journal, 124 (1279), 1301–1317. doi:10.1017/aer.2020.44
2019
Vorträge
Wärmeübergang bei einspritzgekühlten Stirnzahnrädern
Kromer, C.; von Plehwe, F. C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2019, Oktober 1. Deutscher Luft- und Raumfahrtkongress (DLRK 2019), Darmstadt, Deutschland, 30. September–2. Oktober 2019
Effect of Design Parameters on Oil-jet Gear Interaction - A CFD Study
Keller, M. C.; Kromer, C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2019. 24th ISABE Conference (2019), Canberra, Australien, 22.–27. September 2019
Proceedingsbeiträge
Effect of Design Parameters on Oil-jet Gear Interaction - A CFD Study
Keller, M. C.; Kromer, C.; Cordes, L.; Schwitzke, C.; Bauer, H.-J.
2019. Proceedings of the 24th ISABE Conference
Progress in the Smoothed Particle Hydrodynamics method to simulate and post-process spray generation
Chaussonnet, G.; Dauch, T.; Keller, M.; Okraschevski, M.; Ates, C.; Schwitzke, C.; Koch, R.; Bauer, H.-J.
2019. 10th International Conference on Multiphase Flow, Rio de Janeiro, BR, May 19-24, 2019
Zeitschriftenaufsätze
Contamination of Brush Seals by Oil and Salt and Its Impact on Rubbing and Hysteresis Behaviour
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2019. International journal of turbomachinery, propulsion and power, 40 (4). doi:10.3390/ijtpp4040040
Analytical Solution to the Heat Transfer in Fling-Off Cooling of Spur Gears
Kromer, C.; Cordes, L.; Keller, M. C.; Schwitzke, C.; Bauer, H.-J.
2019. Journal of heat transfer, 141 (8), 082103–1. doi:10.1115/1.4043894
Smoothed Particle Hydrodynamics Simulation of Oil-jet Gear Interaction
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T. F.; Koch, R.; Schwitzke, C.; Bauer, H.-J.
2019. Journal of tribology, 141 (7), Art.-Nr. 071703. doi:10.1115/1.4043640
Experimental Investigation on the Influence of Geometrical Parameters on the Frictional Heat Input and Leakage Performance of Brush Seals
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2019. Journal of engineering for gas turbines and power, 141 (4), 042504. doi:10.1115/1.4038767
Buchaufsätze
Application of the SPH Method to Predict Primary Breakup in Complex Geometries
Chaussonnet, G.; Dauch, T.; Braun, S.; Keller, M.; Kaden, J.; Schwitzke, C.; Jakobs, T.; Koch, R.; Bauer, H.-J.
2019. High Performance Computing in Science and Engineering ’ 18 – Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2018. Ed.: W. Nagel, 309–322, Springer International Publishing. doi:10.1007/978-3-030-13325-2_19
2018
Proceedingsbeiträge
Extensive Investigations on Radial Crack Formation in Labyrinth Seals of Aircraft Engines
Hühn, L.; Rieger, F.; Bleier, F.; Schwitzke, C.; Bauer, H.-J.; Behnisch, T.
2018. Deutscher Luft- und Raumfahrtkongress, Friedrichshafen, Deutschland, 4 - 6 September 2018, 8 S., Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR). doi:10.25967/480120
Investigating the Change of Discharge Behavior of Gas and Liquid by Means of Analytical and Numerical Approaches
Cordes, L.; Hühn, L.; Schwitzke, C.; Bauer, H.-J.
2018. Proceedings of GPPS Forum 18 Global Power and Propulsion Society, Zurich, 10th -12th January 2018, 1–9, Global Power and Propulsion Society (GPPS)
A New Approach for Scaling Aspirating Face Seal Aerodynamics
Wilhelm, J.; Schwitzke, C.; Bauer, H.-J.; Nguyen, T.
2018. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, Oslo, Norway, June 11–15, 2018. Volume 5B, GT2018–75812, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2018-75812
Experimentelle Untersuchung von Anstreifvorgängen in Turbomaschinen
Munz, O.; Schwitzke, C.; Welzenbach, S.; Fischer, T.; Kyzy, S. U.; Bauer, H.-J.
2018. Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. Hrsg.: W. Breh, 101–105, KIT Scientific Publishing. doi:10.5445/IR/1000085344
Numerische Simulation der Ölstrahl-Zahnrad-Interaktion bei Flugtriebwerken mit hohem Nebenstromverhältnis: Stand der Forschung
Keller, M. C.; Schwitzke, C.; Bauer, H.-J.
2018. Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. Hrsg.: W. Breh, 75–82, KIT Scientific Publishing. doi:10.5445/IR/1000085339
New Insights in the Primary Breakup Process of Prefilming Airblast Atomizers by SPH Predictions
Holz, S.; Braun, S.; Chaussonnet, G.; Dauch, T.; Kaden, J.; Keller, M.; Schwitzke, C.; Koch, R.; Bauer, H.-J.
2018. ICLASS 2018: 14th International Conference on Liquid Atomization and Spray Systems, Chicago, Ill, July 22-26, 2018, ILASS-Americas
Three-dimensional SPH simulation of a twin-fluid atomizer operating at high pressure [in press]
Chaussonnet, G.; Braun, S.; Dauch, T.; Keller, M.; Kaden, J.; Jakobs, T.; Schwitzke, C.; Koch, R.; Bauer, H.-J.
2018. Proceedings of the 14th International Conference on Liquid Atomization & Spray Systems (ICLASS2018), Chicago, IL, July 22-26, 2018
Experimental Investigation of the Sealing Performance of a New Adaptive Seal System
Beermann, L. S.; Wilhelm, J.; Höfler, C.; Bauer, H.-J.
2018. Proceedings of GPPS Forum 18, Zurich, CH, January 10-12, 2018, Paper 005
Modelling the Rubbing Process in Labyrinth Seals
Munz, O.; Schwitzke, C.; Bauer, H.-J.; Welzenbach, S.; Fischer, T.; Ulan kyzy, S.
2018. Proceedings of GPPS Forum 18, Zurich, CH, January 10-12, 2018, GPPS-2018–0038/ 1
Zeitschriftenaufsätze
A New Approach for Scaling Aspirating Face Seal Aerodynamics
Wilhelm, J.; Schwitzke, C.; Bauer, H.-J.; Nguyen, T.
2018. Journal of engineering for gas turbines and power, 141 (3), 031007. doi:10.1115/1.4041515
Effects of the Back Plate Inner Diameter on the Frictional Heat Input and General Performance of Brush Seals
Hildebrandt, M.; Schwarz, H.; Schwitzke, C.; Bauer, H.-J.; Friedrichs, J.
2018. Aerospace, 5 (2), 58. doi:10.3390/aerospace5020058
2017
Vorträge
Smoothed Particle Hydrodynamics Simulation of Oil-Jet Gear Interaction
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T. F.; Koch, R.; Schwitzke, C.; Bauer, H.-J.
2017. ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT 2017), Charlotte, NC, USA, 26.–30. Juni 2017
Modellierung und Simulation der Öl-Luft-Zweiphasenströmung in Reduktionsgetrieben ziviler Turbinen-Luftstrahltriebwerke mit hohem Bypassverhältnis
Keller, M. C.; Schwitzke, C.; Bauer, H.-J.
2017, Juni 2. Jahrestagung des KIT-Zentrums Energie, Karlsruhe, 2. Juni 2017
Experimentelle Untersuchung von Anstreifvorgängen in Turbomaschinen
Munz, O.; Schwitzke, C.; Welzenbach, S.; Fischer, T.; Kyzy, S. U.; Bauer, H.-J.
2017. 6. Jahrestagung des KIT-Zentrums Energie, Innovationen für die Energie von morgen, Karlsruhe, 2. Juni 2017
Forschungsberichte/Preprints
Einfluß der Variation geometrischer Größen auf das Anstreif- und Leckageverhalten von Bürstendichtungen
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2017. Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV)
Proceedingsbeiträge
Einfluss der Variation geometrischer Größen auf das Anstreif- und Leckageverhalten von Bürstendichtungen
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2017. Abschluss- und Zwischenberichte der Forschungsstellen Turbomaschinen : Frühjahrstagung 2017 : Tagungsband : 2017 - Bad Neuenahr, Frankfurt
Experimental Investigation of the Influence of Chamber Geometry on Bearing Chamber Oil Leakage
Plehwe, F. von; Brox, B.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017. Vol.: 1, V001T01A013 / 1–7, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2017-63561
Experimental Investigation on the Influence of Geometrical Parameters on the Frictional Heat Input and Leakage performance of Brush Seals
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26-30, 2017. Volume 5B, 39–50, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2017-63423
Smoothed Particle Hydrodynamics Simulation of Oil-Jet Gear Interaction
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T. F.; Koch, R.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition : Volume 2B - Turbomachinery, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017–63594, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2017-63594
HPC Predictions of Primary Atomization with SPH : Validation and Comparison to Experimental Results
Braun, S.; Holz, S.; Wieth, L.; Dauch, T. F.; Keller, M. C.; Chaussonnet, G.; Schwitzke, C.; Bauer, H.-J.
2017. 12th International SPHERIC Workshop, Ourense, E, June 13-15, 2017
Zeitschriftenaufsätze
Experimental study of the pressure loss in aero-engine air-oil separators
Cordes, L.; Pychynski, T.; Schwitzke, C.; Bauer, H.-J.; De Carvalho, T. P.; Morvan, H. P.
2017. The aeronautical journal, 121 (1242), 1147–1161. doi:10.1017/aer.2017.41
2016
Vorträge
Modeling of the deformation dynamics of single and twin fluid droplets exposed to aerodynamic loads and Smoothed Particle Hydrodynamics for Numerical Predictions of Primary Atomization
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T. F.; Keller, M.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science & Engineering : 19th Results and Review Workshop of the HLRS, Stuttgart, Germany, 13th - 14th October 2016
Numerical Modeling of Oil-Jet Lubrication for Spur Gears using Smoothed Particle Hydrodynamics
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T.; Koch, R.; Höfler, C.; Bauer, H.-J.
2016. 11th International SPHERIC Workshop, Munich, Germany, 13th - 16th June 2016
Proceedingsbeiträge
Untersuchung eines Fluid-Struktur-Interaktion Referenzfalls mittels OpenFOAM® extend
Fischer, B.; Beermann, L.; Höfler, C.; Bauer, H.-J.
2016. Deutscher Luft- und Raumfahrtkongress 2016 : Luft- und Raumfahrt : Hochtechnologie aus Deutschland, Braunschweig, Deutschland, 13 - 15 September 2016, Art. Nr. 420348, Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)
Numerical Investigation of the Liquid Atomisation at Rotating Holes using the Volume-of-Fluid Method
Krug, M. B.; Höfler, C.; Bauer, H.-J.
2016. ILASS - Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Brighton, UK, 4-7 September 2016
HPC Predictions of Primary Atomization with SPH: Challenges and Lessons Learned
Braun, S.; Wieth, L.; Dauch, T.; Keller, M. C.; Chaussonnet, G.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. 11th International SPHERIC Workshop (SPHERIC 2016), München, 13.-16. Juni 2016
Modeling of the Deformation Dynamics of Single and Twin Fluid Droplets Exposed to Aerodynamic Loads
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T. F.; Keller, M.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science and Engineering ’16 - Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2016. Ed.: W. Nagel, 301–320, Springer Verlag. doi:10.1007/978-3-319-47066-5_21
Numerical Modeling of Oil-Jet Lubrication for Spur Gears using Smoothed Particle Hydrodynamics
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T.; Koch, R.; Höfler, C.; Bauer, H.-J.
2016. Proceedings of the 11th International SPHERIC Workshop, Munich, June 13-16, 2016, 69–76
Modeling of the Deformation Dynamics of Single and Twin Fluid Droplets Exposed to Aerodynamic Loads
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T.; Keller, M. C.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. 27th Annual Conference on Liquid Atomization and Spray Systems, ILASS-Europe, Brighton, GB, September 4 - 7, 2016
Limitations of a State-of-the-Art Numerical Modelling Framework for Two-Phase Flow in Aero-Engine Air/Oil Separators
De Carvalho, T. P.; Morvan, H. P.; Hargreaves, D.; Cordes, L.; Höfler, C.
2016. Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Volume 1 : Aircraft Engine, Fans and Blowers, Marine, Seoul, South Korea, 13th - 17th June 2016, Art.Nr. GT2016–56633, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-56633
Experimental and Numerical Investigations on Oil Leakage Across Labyrinth Seals in Aero Engine Bearing Chambers
von Plehwe, F. C.; Krug, M. B.; Höfler, C.; Bauer, H.-J.
2016. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016, Volume 1: Aircraft Engine; Fans and Blowers, V001T01A010/1–8, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-56297
Zeitschriftenaufsätze
Experimental Study on the Friction Contact Between a Labyrinth Seal Fin and a Honeycomb Stator
Pychynski, T.; Höfler, C.; Bauer, H.-J.
2016. Journal of Engineering for Gas Turbines and Power, 138 (6), 062501/1–9. doi:10.1115/1.4031791
2015
Proceedingsbeiträge
Design of a High-Speed Rotating Test Rig for Adaptive Seal Systems
Beermann, L. S.; Höfler, C.; Bauer, H.-J.
2015. Proceedings of ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition, Volume 2B : Turbomachinery, Montreal, Quebec, Canada, 15th - 19th June 2015, Art.Nr. GT2015–42329, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2015-42329
Evaluation of the Volume-of-Fluid Method for the Numerical Modelling of an Aero Engine Bearing Chamber
Krug, M. B.; Kurz, W.; Höfler, C.; Bauer, H.-J.
2015. The 22nd International Symposium on Air Breathing Engines (ISABE 2015), Phoenix, AZ, USA, October 25-30, 2015, 1–10
Design and Validation of a Test Rig for Heat Transfer Measurements on a Rotating Cone
Bleier, F.; Pychynski, T.; Höfler, C.; Bauer, H.-J.
2015. The 22nd International Symposium on Air Breathing Engines (ISABE 2015), Phoenix, AZ, USA, October, 25-30, 2015
Simulation of Primary Atomization: Assessment of the Smoothed Particle Hydrodynamics (SPH) Method
Braun, S.; Krug, M.; Wieth, L.; Höfler, C.; Koch, R.; Bauer, H.-J.
2015. ICLASS 2015 / 13th International Conference on Liquid Atomization and Spray Systems : August 23-27, 2015, Tainan, Taiwan. Ed.: Ta-Hui Lin
2013
Proceedingsbeiträge
Modeling Fuel Injection in Gas Turbines Using the Meshless Smoothed Particle Hydrodynamics Method
Braun, S.; Höfler, C.; Koch, R.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition, Volume 1A : Combustion, Fuels and Emissions, San Antonio, Texas, USA, 3rd - 7th June 2013, Art.Nr. GT2013–94027, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2013-94027
2012
Proceedingsbeiträge
Multiphase Flow Simulations Using the Meshfree Smoothed Particle Hydrodynamics Method
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2012. 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012 (ICLASS). Hrsg.: E. Gutheil, 1–8, ILASS Europe
Modeling spray formation in gas turbines - A new meshless approach
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 371–381, The American Society of Mechanical Engineers (ASME). doi:10.1115/GT2012-68489
2011
Proceedingsbeiträge
Towards the Numerical Prediction of Primary Atomization Using Smoothed Particle Hydrodynamics
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS’11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
2010
Proceedingsbeiträge
Entwicklung eines Smoothed Particle Hydrodynamics Codes zur numerischen Berechnung des Primärzerfalls an Brennstoffeinspritzdüsen
Höfler, C.; Koch, R.; Bauer, H.-J.
2010. Deutscher Luft- und Raumfahrtkongress 2010 : Hamburg, 31. August - 2. September 2010 ; Tagungsband, CD-ROM, Deutsche Gesellschaft für Luft- und Raumfahrt (DGLR)