Pritz.jpg

Dr.-Ing. Balazs Pritz

  • Institut für Thermische Strömungsmaschinen
    KIT, Campus Süd
    Geb. 10.91
    Kaiserstraße 12
    D-76131 Karlsruhe

Veröffentlichungen und Tagungsbeiträge


2022
Zeitschriftenaufsätze
Selection of a steam condensation model for atmospheric air transonic flow prediction
Wiśniewski, P.; Majkut, M.; Dykas, S.; Smołka, K.; Zhang, G.; Pritz, B.
2022. Applied Thermal Engineering, 203, Art.-Nr.: 117922. doi:10.1016/j.applthermaleng.2021.117922
Proceedingsbeiträge
Towards a Fair Centrifugal Fan Database for Off-Design Validation of CFD Simulations
Probst, M.; Pritz, B.; Bauer, H.-J.
2022. FAN 2022 – International Conference on Fan Noise, Aerodynamics, Applications and Systems, Senlis, Frankreich, 27.06.-29.06.2022. doi:10.26083/tuprints-00021695
2021
Zeitschriftenaufsätze
Identification of unsteady effects in the flow through a centrifugal fan using CFD/CAA methods
Pritz, B.; Probst, M.; Wiśniewski, P.; Dykas, S.; Majkut, M.; Smołka, K.
2021. Archives of thermodynamics, 42 (4), 169–181. doi:10.24425/ather.2021.139657
Proceedingsbeiträge
Numerical studies of the air humidity and pollution importance in the flow through the gas turbine’s rotor compressor
Wiœniewski, P.; Dykas, S.; Pritz, B.
2021. Proceedings of 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics (ETC14): April 12–16, 2021 ; Gdansk, Poland
2020
Zeitschriftenaufsätze
Numerical approaches for moist air condensing flows modelling in the transonic regime
Wiśniewski, P.; Dykas, S.; Yamamoto, S.; Pritz, B.
2020. International journal of heat and mass transfer, 162, Art. Nr.: 120392. doi:10.1016/j.ijheatmasstransfer.2020.120392
2019
Vorträge
Quantitative Validation of CFD-Simulation against PIV Data for a Centrifugal Fan
Probst, M.; Pritz, B.
2019, August 7. 14th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows (2019), Danzig, Polen, 8.–11. Juli 2019
Versuchsstand zur Validierung von Simulationen im Off-Design Betrieb von Radialventilatoren
Probst, M.; Pritz, B.
2019, März 6. 11. Kolloquium Fluidenergiemaschinen (FEM 2019), Berlin, Deutschland, 6.–8. März 2019
2018
Proceedingsbeiträge
A Centrifugal Fan Test Bench for Validation Data at Off-Design Conditions
Pritz, B.; Walter, J.; Gabi, M.
2018. Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems (fan2018), Darmstadt 2018, CETIAT
Vorträge
Versuchsstand zur Validierung von Simulationen im Off-Design Betrieb von Radialventilatoren
Pritz, B.; Gabi, M.
2018. 10th Kolloquium Fluidenergiemaschinen (FEM 2018), Wien, Österreich, 28. Februar–2. März 2018
2017
Zeitschriftenaufsätze
Transition between free, mixed and forced convection
Jaeger, W.; Trimborn, F.; Niemann, M.; Saini, V.; Hering, W.; Stieglitz, R.; Pritz, B.; Fröhlich, J.; Gabi, M.
2017. IOP conference series / Materials science and engineering, 228 (1), Art. Nr.: 012011. doi:10.1088/1757-899X/228/1/012011
Proceedingsbeiträge
On the resonant behavior of compressible flow simulations
Pritz, B.; Gabi, M.
2017. Proceedings of the International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, ISAIF-13
Numerical Investigation of a Centrifugal Fan
Walter, J.; Trimborn, F.; Pritz, B.; Krämer, V.; Gabi, M.
2017. Proceedings of the International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, ISAIF-13
Investigation of turbulent heat flux models for low molecular Prandtl numbers in turbulent planar channel and square duct flows
Trimborn, F.; Pritz, B.; Gabi, M.
2017. Proceedings of the International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, ISAIF-13
2015
Proceedingsbeiträge
An Algebraic Model for the Turbulent Heat Fluxes in Liquid Metal Flows
Trimborn, F.; Pritz, B.; Gabi, M.
2015. Conference on Modelling Fluid Flow (CMFF’15), Hungary, 1 - 4 September 2015, Budapest
2013
Zeitschriftenaufsätze
Aerodynamic Study of a Small-Scale Wind Turbine
Barbier, E.; Bucello, P.; D’hers, S.; Mosquera, P. M.; Pritz, B.; Bottini, N.; Micheloud, M.
2013. Mecánica Computacional, 32 (7), 517–527
Numerical Simulation of Turbulent Swirling Flows – Numerical Simulation of Turbulent Swirling Flows
Ćoćić, A.; Pritz, B.; Gabi, M.; Lečić, M.
2013. Proceedings in applied mathematics and mechanics, 13 (1), 309–310. doi:10.1002/pamm.201310150
Proceedingsbeiträge
A Fluid-Structure-Interaction tool by coupling of existing codes
Michaelsen, P. M.; Pritz, B.; Gabi, M.
2013. 20th European MPI Users’ Group Meeting, EuroMPI 2013; Madrid; Spain; 15 September 2013 through 18 September 2013, 157–162, Association for Computing Machinery (ACM). doi:10.1145/2488551.2488575
Numerical simulation of turbulent swirling flows
Cocic, A.; Pritz, B.; Gabi, M.; Lecic, M.
2013. 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Novi Sad, Serbia, March 18-22, 2013 [Konferenz]
Numerical Investigation of the Flow Inside the Combustion Chamber of a Plant Oil Stove
Pritz, B.; Werler, M.; Wirbser, H.; Gabi, M.
2013. 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF’13), Shenzhen, China, May 6-11, 2013
2012
Buchaufsätze
Stability Investigation of Combustion Chambers with LES
Pritz, B.; Gabi, M.
2012. Advanced Fluid Dynamics. Ed.: Oh, Hyoung Woo, Chapter 9, IntechOpen. doi:10.5772/28254
2010
Zeitschriftenaufsätze
A novel approach to predict the stability limits of combustion chambers with large eddy simulation
Pritz, B.; Magagnato, F.; Gabi, M.
2010. Journal of thermal science, 19 (3), 261–265. doi:10.1007/s11630-010-0261-8
Proceedingsbeiträge
A New Sliding Interface Method for Fluid Machinery Calculations
Pritz, B.; Werner, R.; Gabi, M.
2010. Proceedings of the 14th of International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-14), Honolulu, USA
2009
Dissertationen
Large Eddy Simulation of the Pulsating, Non-Reacting Flow in Combustion Chambers. Dissertation
Pritz, B.
2009. Universität Karlsruhe (TH). doi:10.5445/IR/1000013704
Proceedingsbeiträge
Stability Analysis of Combustion Systems by Means of Large Eddy Simulation
Pritz, B.; Magagnato, F.; Gabi, M.
2009. Proceedings of the 14th International Conference on Modelling Fluid Flow (CMFF’09), Budapest, H, September 9-12, 2009, Budapest
Prediction of the Damping Characteristics of a Combustion chamber by LES
Magagnato, F.; Pritz, B.; Gabi, M.
2009. Proceedings / ISTP-20, the 20th International Symposium on Transport Phenomena : Victoria, BC, Canada, July 7 - 10, 2009 / ed. by Ned Djilali ..., Victoria University
A Novel Approach to Predict the Stability Limit of Combustion Chambers with LES
Magagnato, F.; Pritz, B.; Gabi, M.
2009. Conference proceedings / 9th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF9), Gyeongju, Korea, 8-11 September 2009; 1 CD-Rom, School of Mechanical Engineering Andong National University
2008
Buchaufsätze
Investigation of the Effect of Surface Roughness on the Pulsating Flow in Combustion Chambers with LES
Pritz, B.; Magagnato, F.; Gabi, M.
2008. EKC 2008 : Proceedings of the EU Korea Conference on Science and Technology. Ed.: S.-D. Yoo, 69–76, Springer. doi:10.1007/978-3-540-85190-5_6
Large Eddy Simulation (LES) with moving meshes on a Rapid Compression Machine. Numerical Investigations using Euler-Lagrange-Technique
Magagnato, F.; Pritz, B.; Heidenreich, T.; Velji, A.; Spicher, U.
2008. High performance computing in science and engineering 07. Ed.: W.E. Nagel, 419–430, Springer Verlag
2007
Zeitschriftenaufsätze
Calculation of the VKI turbine blade with LES and DES
Magagnato, F.; Pritz, B.; Gabi, M.
2007. Journal of Thermal Sciences, 16 (4), 321–328. doi:10.1007/s11630-007-0321-x
Proceedingsbeiträge
Generation of Inflow Conditions for Large-Eddy Simulation of Compressible Flows
Magagnato, F.; Pritz, B.; Gabi, M.
2007. Conference proceedings / 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows : July 2 - 5, 2007, Lyon, France / org. by Laboratoire de Mécanique des Fluides et d’Acoustique at École Centrale de Lyon. Ed. by X. Ottavy ..., Laboratoire de Mécanique des Fluides et d’Acoustique
2006
Proceedingsbeiträge
Inlet Condition for Large-Eddy Simulation Applied to a Combustion Chamber
Pritz, B.; Magagnato, F.; Gabi, M.
2006. Conference proceedings / 13th Conference on Modelling Fluid Flow, (CMFF’06), Budapest, Hungary, September 6 - 9, 2006; Vol. 2. Ed.: T. Lajos, 845–850, Department of Fluid Mechanics of Budapest Univ. of Technology and Economics
Inflow conditions for large-eddy simulation applied to a combustion chamber
Pritz, B.; Magagnato, F.; Gabi, M.
2006. Proceedings of the 5th International Symposium on Turbulence, Heat and Mass Transfer, Dubrovnik, Croatia, September 25 - 29, 2006. Ed.: K. Hanjalic, 343–346, ICHMT
Calculation of a Turbine Blade at high Reynoldsnumber by LES
Magagnato, F.; Pritz, B.; Gabi, M.
2006. Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 26 - March 2, 2006. Eds.: K.T. Millsaps, Curran
2005
Zeitschriftenaufsätze
Prediction of the Resonance Characteristic of Combustion Chambers on the Basis of Large-Eddy-Simulation
Magagnato, F.; Pritz, B.; Büchner, H.; Gabi, M.
2005. Journal of Thermal Sciences, 14 (2), 156–161. doi:10.1007/s11630-005-0027-x