Home | english  | Impressum | Sitemap | KIT
Bauer

Prof. Dr.-Ing. Hans-Jörg Bauer

Ordinarius und Institutsleiter
Sprechstunden: 

Mittwoch 12.30-13.30 Uhr


Raum: Im Sekretariat Raum 115 anmelden!
Tel.: +49 721 608 43240
Fax: +49 721 608 42767
hans-joerg bauerWcf0∂kit edu

Institut für Thermische Strömungsmaschinen
KIT, Campus Süd
Geb. 10.91
Kaiserstr. 12
D-76131 Karlsruhe



Veröffentlichungen und Tagungsbeiträge


2017
Forschungsberichte
Einfluß der Variation geometrischer Größen auf das Anstreif- und Leckageverhalten von Bürstendichtungen.
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2017. Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt a.M
Proceedingsbeiträge
Durchführung von FEM Simulationen zur Anwendung des Superpositionsprinzips der Filmkühlung.
Jungh, T.; Glasenapp, T.; Fraas, M.; Schulz, A.; Bauer, H.-J.
2017. Deutscher Luft- und Raumfahrtkongress 2017 (DLRK), Sitzung : Luftfahrtantriebe - Modellierung und Pre-Design, München, Deutschland, 5. - 7. September 2017, Art. Nr. 450344, Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn
A Novel Test Rig for Assessing Advanced Rotor Blade Cooling Concepts, Measurement Technique and First Results.
Elfner, M.; Schulz, A.; Bauer, H.-J.; Lehmann, K.
2017. ASME Turbo Expo 2017 : Turbomachinery Technical Conference and Exposition, Volume 5A : Heat Transfer, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017-64539, ASME, New York (NY). doi:10.1115/GT2017-64539
Influence of aerodynamic mistuning and aerodynamic coupling on vibration behavior of mistuned small radial turbine wheels.
Hemberger, D.; Filsinger, D.; Bauer, H. J.
2017. ASME Turbo Expo 2017 : Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines, Charlotte, North Carolina, USA, 26th - 30th June 2017, American Society of Mechanical Engineers, New York. doi:10.1115/GT2017-63069
Experimental Investigation of the Influence of Chamber Geometry on Bearing Chamber Oil Leakage.
Plehwe, F. von; Brox, B.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017. Vol.: 1, V001T01A013 / 1-7, ASME, New York (NY). doi:10.1115/GT2017-63561
Short Helical Combustor: Flow Control in a Combustion System With Angular Air Supply.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2017. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017. Vol.: 4A, V04AT04A001, ASME, New York (NY). doi:10.1115/GT2017-63037
Assessment of Real Turbine Blade Roughness Parameters for the Design of a Film Cooling Test Rig.
Glasenapp, T.; Puetz, F.; Schulz, A.; Bauer, H.-J.
2017. ASME Turbo Expo 2017 : Turbomachinery Technical Conference & Exposition, Charlotte, USA, 26-30 June 2017, GT2017-63088, ASME, New York. doi:10.1115/GT2017-63088
Introducing a New Test Rig for Film Cooling Measurements with Realistic Hole Inflow Conditions.
Fraas, M.; Glasenapp, T.; Schulz, A.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017 : Turbomachinery Technical Conference & Exposition, Volume 5 C : Heat Transfer, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017-63585, ASME, New York (NY). doi:10.1115/GT2017-63585
Experimental Investigation on the Influence of Geometrical Parameters on the Frictional Heat Input and Leakage performance of Brush Seals.
Hildebrandt, M.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26-30, 2017. Volume 5B, 39-50, ASME, New York, USA. doi:10.1115/GT2017-63423
SPH Simulation of an Air-Assisted Atomizer Operating at High Pressure : Influence of Non-Newtonian Effects.
Chaussonnet, G.; Koch, R.; Bauer, H.-J.; Sänger, A.; Jakobs, T.; Kolb, T.
2017. Proceedings of ASME Turbo Expo 2017 : Turbomachinery Technical Conference & Exposition, Volume 3 : Coal, Biomass and Alternative Fuels, Cycle Innovations; Electric Power, Industrial and Cogeneration Applications, Organic Rankine Cycle Power Systems, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017-63033, ASME, New York (NY). doi:10.1115/GT2017-63033
Computational Prediction of Primary Breakup in Fuel Spray Nozzles for Aero-Engine Combustors.
Dauch, T. F.; Braun, S.; Wieth, L.; Chaussonnet, G.; Keller, M. C.; Koch, R.; Bauer, H.-J.
2017. ILASS 2017 : 28th European Conference on Liquid Atomization and Spray Systems, Valencia, Spain, 6th - 8th September 2017
Smoothed Particle Hydrodynamics Simulation of Oil-Jet Gear Interaction.
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T. F.; Koch, R.; Schwitzke, C.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition : Volume 2B - Turbomachinery, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017-63594, ASME, New York (NY). doi:10.1115/GT2017-63594
Time-Response of Recent Prefilming Airblast Atomization Models in an Oscillating Air Flow Field.
Chaussonnet, G.; Müller, A.; Holz, S.; Koch, R.; Bauer, H.-J.
2017. Proceedings of ASME Turbo Expo 2017 : Turbomachinery Technical Conference & Exposition, Volume 4 A : Combustion, Fuels and Emissions, Charlotte, North Carolina, USA, 26th - 30th June 2017, Art.Nr. GT2017-63041, ASME, New York (NY). doi:10.1115/GT2017-63041
HPC Predictions of Primary Atomization with SPH : Validation and Comparison to Experimental Results.
Braun, S.; Holz, S.; Wieth, L.; Dauch, T. F.; Keller, M. C.; Chaussonnet, G.; Schwitzke, C.; Bauer, H.-J.
2017. 12th International SPHERIC Workshop, Ourense, Spain, 13th - 15th June 2017
Preprocessing Workflow for the Initialization of SPH Predictions based on Arbitrary CAD Models.
Dauch, T. F.; Okraschevski, M.; Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Koch, R.; Bauer, H.-J.
2017. 12th International SPHERIC Workshop, Universidade de Vigo, Ourense, Spain, 13th - 15th June 2017
Zeitschriftenaufsätze
Short Helical Combustor : Flow Control in a Combustion System With Angular Air Supply.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2017. Journal of engineering for gas turbines and power, 140 (3), 031507/1-6. doi:10.1115/1.4037961
Smoothed Particle Hydrodynamics for Numerical Predictions of Primary Atomization.
Braun, S.; Koch, R.; Bauer, H.-J.
2017. Innovatives Supercomputing in Deutschland, 15 (1), 56-60
Time-Response of Recent Prefilming Airblast Atomization Models in an Oscillating Air Flow Field.
Chaussonnet, G.; Müller, A.; Holz, S.; Koch, R.; Bauer, H.-J.
2017. Journal of engineering for gas turbines and power, 139 (12), Art. Nr. 121501. doi:10.1115/1.4037325
Experimental study of the pressure loss in aero-engine air-oil separators.
Cordes, L.; Pychynski, T.; Schwitzke, C.; Bauer, H.-J.; De Carvalho, T. P.; Morvan, H. P.
2017. The aeronautical journal, 121 (1242), 1147-1161. doi:10.1017/aer.2017.41
Experimental and numerical investigation of the primary breakup of an airblasted liquid sheet.
Warncke, K.; Gepperth, S.; Sauer, B.; Sadiki, A.; Janicka, J. E.; Koch, R.; Bauer, H. J.
2017. International journal of multiphase flow, 91, 208-224. doi:10.1016/j.ijmultiphaseflow.2016.12.010
Prediction of primary atomization using Smoothed Particle Hydrodynamics.
Koch, R.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T.; Bauer, H.-J.
2017. European journal of mechanics / B, 61 (Part 2), 271-278. doi:10.1016/j.euromechflu.2016.10.007
2016
Vorträge
Modeling of the deformation dynamics of single and twin fluid droplets exposed to aerodynamic loads and Smoothed Particle Hydrodynamics for Numerical Predictions of Primary Atomization.
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T. F.; Keller, M.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science & Engineering : 19th Results and Review Workshop of the HLRS, Stuttgart, Germany, 13th - 14th October 2016
Accelerated Material Testing of Aero Engine Parts in a High Temperature Test Rig at Elevated Pressures.
Jackowski, T.; Schulz, A.; Bauer, H.-J.; Gerendás, M.
2016. ASM Aeromat 2016; Bellevue, Washington, USA; 23.05.2016 - 25.05.2016
Smoothed Particle Hydrodynamics for Numerical Predictions of Primary Atomization.
Braun, S.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science & Engineering : 19th Results and Review Workshop of the HLRS, Stuttgart, Germany, 13.-14. October 2016
Proceedingsbeiträge
Untersuchung eines Fluid-Struktur-Interaktion Referenzfalls mittels OpenFOAM® extend.
Fischer, B.; Beermann, L.; Höfler, C.; Bauer, H.-J.
2016. Deutscher Luft- und Raumfahrtkongress 2016 : Luft- und Raumfahrt : Hochtechnologie aus Deutschland, Braunschweig, Deutschland, 13 - 15 September 2016, Art. Nr. 420348, Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn
Comparison of the Primary Atomization Model PAMELA with Drop Size Distributions of an Industrial Prefilming Airblast Nozzle.
Holz, S.; Chaussonnet, G.; Gepperth, S.; Koch, R.; Bauer, H.-J.
2016. 27th Annual Conference on Liquid Atomization and Spray Systems, ILASS-Europe, Brighton, Great Britain, 4th - 7th September 2016
Prediction of primary atomization using Smoothed Particle Hydrodynamics.
Koch, R.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T.; Bauer, H.-J.
2016. 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 16, Honolulu, 10-15 April 2016, 75 S.
Smoothed Particle Hydrodynamics for Numerical Predictions of Primary Atomization.
Braun, S.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science and Engineering '16 - Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2016. Ed.: W. Nagel, 321-336, Springer, Berlin. doi:10.1007/978-3-319-47066-5_22
Numerical Investigation of the Liquid Atomisation at Rotating Holes using the Volume-of-Fluid Method.
Krug, M. B.; Höfler, C.; Bauer, H.-J.
2016. ILASS - Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Brighton, UK, 4-7 September 2016
HPC Predictions of Primary Atomization with SPH : Challenges and Lessons Learned.
Braun, S.; Wieth, L.; Dauch, T.; Keller, M. C.; Chaussonnet, G.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. 11th International SPHERIC Workshop, Munich, Germany, 13.-16. June 2016
Modeling of the Deformation Dynamics of Single and Twin Fluid Droplets Exposed to Aerodynamic Loads.
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T. F.; Keller, M.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. High Performance Computing in Science and Engineering '16 - Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2016. Ed.: W. Nagel, 301-320, Springer, Berlin. doi:10.1007/978-3-319-47066-5_21
Numerical Modeling of Oil-Jet Lubrication for Spur Gears using Smoothed Particle Hydrodynamics.
Keller, M. C.; Braun, S.; Wieth, L.; Chaussonnet, G.; Dauch, T.; Koch, R.; Höfler, C.; Bauer, H.-J.
2016. 11th International SPHERIC Workshop, Munich, Germany, June 13-16, 2016, 69-76
Modeling of the Deformation Dynamics of Single and Twin Fluid Droplets Exposed to Aerodynamic Loads.
Wieth, L.; Braun, S.; Chaussonnet, G.; Dauch, T.; Keller, M. C.; Höfler, C.; Koch, R.; Bauer, H.-J.
2016. 27th Annual Conference on Liquid Atomization and Spray Systems, ILASS-Europe, Brighton, GB, September 4 - 7, 2016
Computation of liquid fuel atomization and mixing by means of the SPH method: Application to a jet engine fuel nozzle.
Dauch, T.; Braun, S.; Wieth, L.; Chaussonnet, G.; Keller, M.; Koch, R.; Bauer, H.-J.
2016. ASME Turbo Expo 2016 : Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13-17, 2016, American Society of Mechanical Engineers, New York. doi:10.1115/GT2016-56023
Short helical combustor: Dynamic flow analysis in a combustion system with angular air supply.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2016. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul; South Korea, June 13-17, 2016, American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-56046
Effusion cooled combustor liner tiles with modern cooling concepts: A comparative experimental study.
Jackowski, T.; Schulz, A.; Bauer, H.-J.; Gerendás, M.; Behrendt, T.
2016. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul; South Korea, June 13.17, 2016, American Society of Mechanical Engineers (ASME). doi:10.1115/GT2016-56598
Experimental and Numerical Investigations on Oil Leakage Across Labyrinth Seals in Aero Engine Bearing Chambers.
Plehwe, F. C. von; Krug, M. B.; Höfler, C.; Bauer, H.-J.
2016. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016, Volume 1: Aircraft Engine; Fans and Blowers, V001T01A010/1-8, ASME, New York. doi:10.1115/GT2016-56297
Zeitschriftenaufsätze
Short Helical Combustor: Concept Study of an Innovative Gas Turbine Combustor with Angular Air Supply.
Ariatabar, B.; Koch, R.; Bauer, H.-J.; Negulescu, D.-A.
2016. Journal of engineering for gas turbines and power, 138 (3), Art. Nr.: 031503. doi:10.1115/1.4031362
Smoothed Particle Hydrodynamics (SPH) simulation of a high-pressure homogenization process.
Wieth, L.; Kelemen, K.; Braun, S.; Koch, R.; Bauer, H. J.; Schuchmann, H. P.
2016. Microfluidics and nanofluidics, 20 (2), 42. doi:10.1007/s10404-016-1705-6
Short Helical Combustor: Dynamic Flow Analysis in a Combustion System With Angular Air Supply.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2016. Journal of engineering for gas turbines and power, 139 (4), Art.Nr.: 041505. doi:10.1115/1.4034688
Simulations and experiments on the ignition probability in turbulent premixed bluff-body flames.
Sitte, M. P.; Bach, E.; Kariuki, J.; Bauer, H. J.; Mastorakos, E.
2016. Combustion Theory and Modelling, 1-18. doi:10.1080/13647830.2016.1155756
Experimental Study on the Friction Contact Between a Labyrinth Seal Fin and a Honeycomb Stator.
Pychynski, T.; Höfler, C.; Bauer, H.-J.
2016. Journal of Engineering for Gas Turbines and Power, 138 (6), 062501/1-9. doi:10.1115/1.4031791
2015
Vorträge
Zerstäubung von biosyncrude.
Jakobs, T.; Sänger, A.; Jampolski, G.; Chaussonnet, G.; Müller, T.; Willenbacher, N.; Zarzalis, N.; Bauer, H.-J.; Kolb, T.
2015. Bioliq Statusseminar - Querschnittsverbund Sustainable Bioeconomy, Karlsruhe, 01.12.2015
Numerische Strömungs- und Wärmeübergangssimulation in einem konischen Spalt mit rotierender Innenwand und axialer Durchströmung.
Hufnagel, M.; Pychinski, T.; Bleier, F.; Bauer, H.-J.
2015. 63. Deutscher Luft- und Raumfahrtkongress; Augsburg
Forschungsberichte
Development of an Annular Combustor with Helical Arrangement of the Flames.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2015. Forschungsvereinigung Verbrennungskraftmaschinen
Proceedingsbeiträge
Short Helical Combustor: Concept Study of an Innovative Gas Turbine Combustor.
Ariatabar, B.; Koch, R.; Bauer, H.-J.
2015. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, 15 - 19, 2015, Montreal, Quebec, Canada. Vol. 4 (Teil A): Combustion, fuels and emissions, V04AT04A071, ASME, New York (NY). doi:10.1115/GT2015-42963
Design of a High-Speed Rotating Test Rig for Adaptive Seal Systems.
Beermann, L. S.; Höfler, C.; Bauer, H.-J.
2015. Proceedings of ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition, Volume 2B : Turbomachinery, Montreal, Quebec, Canada, 15th - 19th June 2015, Art.Nr. GT2015-42329, ASME, New York. doi:10.1115/GT2015-42329
SPH Simulation of a Twin-Fluid Atomizer Operating with a High Viscosity Liquid.
Chaussonnet, G.; Braun, S.; Wieth, L.; Kolb, T.; Koch, R.; Bauer, H.-J.; Sänger, A.; Jakobs, T.; Djordjevic, N.
2015. ICLASS 2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, August 23–27, 2015. Ed.: T. Lin, 1-8, National Cheng Kung University, Taiwan. doi:10.13140/RG.2.1.4320.7128
Influence of Trailing Edge Height on Primary Atomization : Numerical Studies Applying the Smoothed Particle Hydrodynamics (SPH) Method.
Braun, S.; Wieth, L.; Koch, R.; Bauer, H.-J.
2015. ICLASS 2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 23-27 August 2015, Art. Nr. D1-2-087
A Framework for Permeable Boundary Conditions in SPH : Inlet, Outlet, Periodicity.
Braun, S.; Wieth, L.; Koch, R.; Bauer, H.-J.
2015. Proceedings of the 10th Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2015), Parma, Italy, 16-18 June 2015, Monte Università Parma Editore, Parma
Influence of particle disorder and smoothing length on SPH operator accuracy.
Chaussonnet, G.; Braun, S.; Wieth, L.; Bauer, H.-J.
2015. Proceedings of the 10th Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2015), Parma, Italy, 16-18 June 2015, Monte Università Parma Editore, Parma. doi:10.13140/RG.2.1.3115.1448
Evaluation of the Volume-of-Fluid Method for the Numerical Modelling of an Aero Engine Bearing Chamber.
Krug, M. B.; Kurz, W.; Höfler, C.; Bauer, H.-J.
2015. The 22nd International Symposium on Air Breathing Engines (ISABE 2015), Phoenix, AZ, USA, October 25-30, 2015, 1-10
Design and Validation of a Test Rig for Heat Transfer Measurements on a Rotating Cone.
Bleier, F.; Pychynski, T.; Höfler, C.; Bauer, H.-J.
2015. The 22nd International Symposium on Air Breathing Engines (ISABE 2015), Phoenix, AZ, USA, October, 25-30, 2015
Simulation of Primary Atomization: Assessment of the Smoothed Particle Hydrodynamics (SPH) Method.
Braun, S.; Krug, M.; Wieth, L.; Höfler, C.; Koch, R.; Bauer, H.-J.
2015. ICLASS 2015 / 13th International Conference on Liquid Atomization and Spray Systems : August 23-27, 2015, Tainan, Taiwan. Ed.: Ta-Hui Lin
Numerical Modeling of an Aero-Engine Bearing Chamber Using the Meshless Smoothed Particle Hydrodynamics Method.
Wieth, L.; Lieber, C.; Kurz, W.; Braun, S.; Koch, R.; Bauer, H.-J.
2015. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, GT 2015, Montreal, CDN, June 15 - 19, 2015. Vol. 2 B, ASME. doi:10.1115/GT2015-42316
A New Test Facility to Investigate Film Cooling on a Non-Axisymmetric Contoured Turbine Endwall, Part II: Heat Transfer and Film Cooling Measurements.
Bauer, H.-J.; Schulz, A.; Kneer, J.; Pütz, F.
2015. ASME Turbo Expo 2015 Turbine Technical Conference and Exposition Montreal, Canada 15.06.2015 - 19.06.2015
A New Test Facility to Investigate Film Cooling on a Non-Axisymmetric Contoured Turbine Endwall, Part I: Introduction and Aerodynamic.
Bauer, H.-J.; Schulz, A.; Pütz, F.; Kneer, J.
2015. ASME Turbo Expo 2015; Montreal, Canada Turbine Technical Conference and Exposition 15.06.2015 - 19.06.2015
Zeitschriftenaufsätze
Coherent structures in trailing-edge cooling and the challenge for turbulent heat transfer modelling.
Schneider, H.; Von Terzi, D. A.; Bauer, H.-J.; Rodi, W.
2015. International journal of heat and fluid flow, 51, 110-119. doi:10.1016/j.ijheatfluidflow.2014.10.013
On the visualization of droplet deformation and breakup during high-pressure homogenization.
Kelemen, K.; Gepperth, S.; Koch, R.; Bauer, H. J.; Schuchmann, H. P.
2015. Microfluidics and nanofluidics, 19 (5), 1139-1158. doi:10.1007/s10404-015-1631-z
Effect of the precessing vortex core on primary atomization.
Bärow, E.; Gepperth, S.; Koch, R.; Bauer, H.-J.
2015. Zeitschrift fur Physikalische Chemie, 229 (6), 909-929. doi:10.1515/zpch-2014-0619
Experimental Investigation Into the Efficiency of an Aero-engine Oil Jet Supply System.
Krug, M. B.; Peduto, D.; Kurz, W.; Bauer, H.-J.
2015. Journal of Engineering for Gas Turbines and Power, Vol. 137 (Iss. 1), 011505-1 - 011505-7. doi:10.1115/1.4028255
Experimental Study on Pressure Losses in Circular Orifices for the Application in Internal Cooling Systems.
Binder, C.; Kinell, M.; Utriainen, E.; Eriksson, D.; Bahador, M.; Bauer, H.-J.; Kneer, J.
2015. Journal of Turbomachinery, 137 (3), 1-10. doi:10.1115/1.4028347
2014
Proceedingsbeiträge
Experimental Investigation Into the Efficiency of an Aero Engine Oil Jet Supply System.
Krug, M. B.; Peduto, D.; Kurz, W.; Bauer, H.-J.
2014. ASME Turbo Expo: Turbine Technical Conference and Exposition - Düsseldorf, Germany, June 16 - 20, 2014. Vol. 1, A. Ed.: H. Hodson, V01AT01A026, ASME, New York (NY). doi:10.1115/GT2014-26208
Smoothed Particle Hydrodynamics (SPH) simulation of a high-pressure homogenizer.
Wieth, L.; Braun, S.; Koch, R.; Bauer, H.-J.; Kelemen, K.; Schuchmann, H. P.
2014. Proceedings of the 9th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2014), 3-5 June 2014, Paris, France. Ed.: D. Violeau, 411-419, INSEAN, Rom
Application of the Superposition Principle of Film Cooling on a Non-Axisymmetric Turbine Endwall.
Kneer, J.; Pütz, F.; Schulz, A.; Bauer, H.-J.
2014. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2014 Honolulu; United States; 24 February 2014 through 28 February 2014, ISROMAC
An Opensource Framework for Multi-Objective Flow Optimization as Applied to Labyrinth Seals.
Braun, E.; Pychynski, T.; Bauer, H.-J.
2014. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-15 Honolulu, Hawaiii; February 24 - 28, 2014, ISROMAC
Identification of Mistuning for Casted Turbine Wheels of Small Size.
Hemberger, D.; Filsinger, D.; Bauer, H.-J.
2014. ASME Turbo Expo 2014 June 16-20, 2014; Düsseldorf, Germany Turbine Technical Conference and Exposition, 1-8, American Society of Mechanical Engineers, New York. doi:10.1115/GT2014-25099
Impact of Swirl Flow on the Penetration Behaviour and Cooling Performance of a Starter Cooling Film in Modern Lean Operating Combustion Chambers.
Wurm, B.; Schulz, A.; Bauer, H.-J.; Gerendas, M.
2014. ASME Turbo Expo 2014 Turbine Technical Conference and Exposition Paper Düsseldorf, Germany June 16-20, 2014, 1-13
Numerical Investigation of the Aerodynamic Behaviour of a Compressor Bleed-Air System.
Peltier, V.; Dullenkopf, K.; Bauer, H.-J.
2014. Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2014 : presented at the ASME 2014 Turbo Expo: Turbine Technical Conference and Exposition; June 16 - 20, 2014, Düsseldorf, Germany. Vol. 2A: Axial flow fan and compressor aerodynamics - ducts and component interactions - noise and innovative noise reduction. Ed.: H. Hodson, GT2014-25822, ASME, New York (NY). doi:10.1115/GT2014-25822
Numerical Conjugate Heat Transfer Study of a Cooled Compressor Rear Cone.
Bleier, F.; Hufnagel, M.; Pychynski, T.; Bauer, H.-J.; Eichler, C.
2014. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition Volume 5A: Heat Transfer Düsseldorf, Germany, June 16, 2014 Conference Sponsors: International Gas Turbine Institute, 1-10, Alstom Technologie AG, Levallois-Perret. doi:10.1115/GT2014-26289
An Approach for Predicting the Flow Regime in an Aero Engine Bearing Chamber.
Kurz, W.; Bauer, H.-J.
2014. ASME Turbo Expo 2014; June 16-20, 2014; Düsseldorf, Germany, 1-8, ASME, New York. doi:10.1115/GT2014-26756
Primary atomization of prefilming airblast nozzles : Experimental studies using advanced image processing techniques.
Gepperth, S.; Bärow, E.; Koch, R.; Bauer, H.-J.
2014. ILASS Europe, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen, Germany, 8-10 September 2014
Modeling of liquid-wall interaction using the Smoothed Particle Hydrodynamics (SPH) method.
Wieth, L.; Braun, S.; Koch, R.; Bauer, H.-J.
2014. ILASS Europe, 26th Annual Conference on Liquid Atomization and Spray Systems, Bremen, Germany 8-10 September 2014
Zeitschriftenaufsätze
Direct Numerical Simulation of Stagnation Point Heat Transfer Affected by Varying Wake-Induced Turbulence.
Venema, L.; Von Terzi, D.; Bauer, H.-J.; Rodi, W.
2014. Journal of Turbomachinery, 136 (2), 021008. doi:10.1115/1.4023907
2013
Proceedingsbeiträge
Entwicklung eines instrumentierten Prüfstandsrotors zur Messung von Wärmeeinträgen.
Bleier, F.; Pfefferle, D.; Pychynski, T.; Bauer, H.-J.
2013. 62. Deutscher Luft- und Raumfahrtkongress, Stuttgart, Germany, 10. - 12.09.2013
Simple particle separator for the secondary air system of gas turbines.
Garcia Villora, N.; Dullenkopf, K.; Bauer, H.-J.; Bricaud, C.; Zierer, T.
2013. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 2085-2096, ASME, New York. doi:10.1115/GT2012-68831
Mistuning Modeling and its Validation for Small Turbine Wheels.
Hemberger, D.; Filsinger, D.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 - 7 June 2013, GT2013-94019, ASME, New York. doi:10.1115/GT2013-94019
Modeling Fuel Injection in Gas Turbines Using the Meshless Smoothed Particle Hydrodynamics Method.
Braun, S.; Höfler, C.; Koch, R.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition, Volume 1A : Combustion, Fuels and Emissions, San Antonio, Texas, USA, 3rd - 7th June 2013, Art.Nr. GT2013-94027, ASME, New York (NY). doi:10.1115/GT2013-94027
Analysis and Comparison of Primary Droplet Characteristics in the Near Field of a Prefilming Airblast Atomizer.
Gepperth, S.; Koch, R.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition, Vol. 1A : Combustion, Fuels and Emissions, San Antonio, Texas, USA, 3rd - 7th June 2013, Art.Nr. GT2013-94033, ASME, New York (NY). doi:10.1115/GT2013-94033
Cooling efficiency for assessing the cooling performance of an effusion cooled combustor liner.
Wurm, B.; Schulz, A.; Bauer, H.-J.; Gerendas, M.
2013. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 through 7 June 2013, ASME, New York. doi:10.1115/GT2013-94304
Evaluation of a Piloted Lean Injection System in Terms of Emission Performance and Flame Structure at Elevated Pressure.
Harth, S.; Zarzalis, N.; Bauer, H.-J.; Turrini, F.
2013. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 - 7 June 2013, ASME, New York. doi:10.1115/GT2013-94371
Prediction of high-frequency blade vibration amplitudes in a radial inflow turbine with nozzle guide vanes.
Schwitzke, M.; Schulz, A.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo : ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 through 7 June 2013, GT2013-94761, ASME, New York. doi:10.1115/GT2013-94761
Theoretical study on the origin of radial cracks in labyrinth seal fins due to rubbing.
Pychynski, T.; Dullenkopf, K.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo : ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 through 7 June 2013, GT2013-94834, ASME, New York. doi:10.1115/GT2013-94834
Capacitive film thickness measurements in a ventless aero-engine bearing chamber - Influence of operating conditions and offtake design.
Kurz, W.; Dullenkopf, K.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo : ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 - 7 June 2013, ASME, New York. doi:10.1115/GT2013-94973
Modelling of hydraulic seals using an axisymmetric volume of fluid method (VOF).
Mathews, H.-C.; Morvan, H.; Peduto, D.; Wang, Y.; Young, C.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo : ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 through 7 June 2013, ASME, New York. doi:10.1115/GT2013-95070
Flexible Seal Strip Design for Advanced Labyrinth Seals in Turbines.
Herrmann, N.; Dullenkopf, K.; Bauer, H.-J.
2013. Proceedings of the ASME Turbo Expo :ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013; San Antonio, Tx; United States; 3 June 2013 - 7 June 2013, ASME, New York. doi:10.1115/GT2013-95424
Zeitschriftenaufsätze
Aerodynamische Schwingungsanregung von Radialturbinenschaufeln.
Schwitzke, M.; Schulz, A.; Bauer, H.-J.
2013. MTZ- Motortechnische Zeitschrift, 6, 504-512
Capacitive Film Thickness Measurements in a Ventless Aero-Engine Bearing Chamber - Influence of Operating Conditions and Offtake Design.
Kurz, W.; Dullenkopf, K.; Bauer, H.-J.
2013. Journal of Engineering for Gas Turbines and Power, 135 (11), 112504. doi:10.1115/1.4025067
2012
Proceedingsbeiträge
Multiphase Flow Simulations Using the Meshfree Smoothed Particle Hydrodynamics Method.
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2012. 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012 (ICLASS). Hrsg.: E. Gutheil, 1-8, ILASS Europe, Neapel
Investigations on maximum amplitude amplification factor of real mistuned bladed structures.
Hemberger, D.; Filsinger, D.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 1041-1052, ASME, New York. doi:10.1115/GT2012-68084
Optimization of labyrinth seal performance combining experimental, numerical and data mining methods.
Braun, E.; Dullenkopf, K.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 1847-1854, ASME, New York. doi:10.1115/GT2012-68077
Experimental investigation of the performance of different bleed air system designs.
Peltier, V.; Dullenkopf, K.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 through 15 June 2012, 9-21, ASME, New York. doi:10.1115/GT2012-68242
Predicting rough wall heat transfer and skin friction in transitional boundary layers - A new correlation for bypass transition onset.
Lorenz, M.; Schulz, A.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 through 15 June 2012, 819-832, ASME, New York. doi:10.1115/GT2012-68910
Impact of swirl flow on the cooling performance of an effusion cooled combustor liner.
Wurm, B.; Schulz, A.; Bauer, H.-J.; Gerendas, M.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 through 15 June 2012, 1027-1039, ASME, New York. doi:10.1115/GT2012-68972
Modeling spray formation in gas turbines - A new meshless approach.
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 371-381, ASME, New York. doi:10.1115/GT2012-68489
Coherent structures in trailing-edge cooling and the challenge for turbulent heat transfer modelling.
Schneider, H.; Bauer, H.-J.; Terzi, D. von; Rodi, W.
2012. Proceedings of the ASME Turbo Expo : Proceedings of the ASME Turbo Expo, 1673-1682, ASME, New York. doi:10.1115/GT2012-69771
Influences on the oil split between the offtakes of an aero-engine bearing chamber.
Kurz, W.; Dullenkopf, K.; Bauer, H.-J.
2012. Proceedings of the ASME Turbo Expo : ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 - 15 June 2012, 2251-2259, ASME, New York. doi:10.1115/GT2012-69412
Zeitschriftenaufsätze
Impact of swirl flow on the cooling performance of an effusion cooled combustor liner.
Wurm, B.; Schulz, A.; Bauer, H.-J.; Gerendas, M.
2012. Journal of Engineering for Gas Turbines and Power, 134 (12), 121503. doi:10.1115/1.4007332
Modeling Spray Formation in Gas Turbines : A New Meshless Approach.
Hoefler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2012. Journal of engineering for gas turbines and power, 135 (1), Art. Nr. 011503. doi:10.1115/1.4007378
2011
Proceedingsbeiträge
Verdunstung mit Kristallisation von Einzelpartikeln aus AdBlue.
Kontin, S.; Höfler, A.; Koch, R.; Bauer, H.-J.
2011. Motorische Verbrennung - aktuelle Probleme und moderne Lösungsansätze: X. Tagung, München, 24.-25. März 2011. Hrsg.: A. Leipertz, 187-198, ESYTEC, Erlangen
Influence of internal parallel and V-shaped ribs on the discharge coefficient of cylindrical film cooling holes.
Heneka, C.; Schulz, A.; Bauer, H.-J.
2011. 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC'11), Istanbul, March 21-25, 2011. Conference Proceedings. Vol. 2. Ed.: M. Sen, 823-834, Istanbul Technical University, Istanbul
Effect of Main Flow Acceleration on Trailing Edge Film Cooling with Different Internal Turbolators.
Horbach, T.; Schulz, A.; Bauer, H.-J.
2011. 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC'11), Istanbul, March 21-25, 2011. Conference Proceedings. Vol. 2. Ed.: M. Sen, 835-844, Istanbul Technical University, Istanbul
Separation of Particles in the Secondary Air System of Gas Turbines.
Villora, N. G.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 1: Aircraft Engine - Ceramics - Coal, Biomass and Alternative Fuels - Wind Turbine Technology, 25-37, ASME, New York (NY). doi:10.1115/GT2011-45080
Experimental and Numerical Investigation of Flow Field and Downstream Surface Temperatures of Cylindrical and Diffuser Shaped Film Cooling Holes.
Auf dem Kampe, T.; Völker, S.; Sämel, T.; Heneka, C.; Ladisch, H.; Schulz, A.; Bauer, H.-J.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 5 Heat Transfer, 21-34, ASME, New York (NY). doi:10.1115/GT2011-45106
Design and Validation of a New Test Rig for Brush Seal Testing Under Engine Relevant Conditions.
Pfefferle, D.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 5 Heat Transfer, 679-689, ASME, New York (NY). doi:10.1115/GT2011-45107
Experimental Investigation of Lubrication Oil Film Dynamics in a Typical Aero-Engine Bearing Chamber Environment.
Hashmi, A. A.; Dullenkopf, K.; Bauer, H.-J.; Klingsporn, M.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 5 Heat Transfer, 797-807, ASME, New York (NY). doi:10.1115/GT2011-45545
Modelling of an Aero-Engine Bearing Chamber Using Enhanced CFD Technique.
Peduto, D.; Hashmi, A. A.; Dullenkopf, K.; Bauer, H.-J.; Morvan, H.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 5 Heat Transfer, 809-819, ASME, New York (NY). doi:10.1115/GT2011-45635
Investigation of the influence of different rim seal geometries in a low-pressure turbine.
Schuler, P.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 7 Turbomachinery, 715-729, ASME, New York (NY). doi:10.1115/GT2011-45682
Understanding the Twin Scroll Turbine: Flow Similarity.
Brinkert, N.; Sumser, S.; Schulz, A.; Weber, S.; Fieweger, K.; Bauer, H.-J.
2011. Proceedings of the ASME Turbo Expo 2011, Vancouver, British Columbia, Canada, June 6 - 10, 2011; Vol. 7 Turbomachinery, 2207-2218, ASME, New York (NY). doi:10.1115/GT2011-46820
Towards the Numerical Prediction of Primary Atomization Using Smoothed Particle Hydrodynamics.
Höfler, C.; Braun, S.; Koch, R.; Bauer, H.-J.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS'11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
Model comparison for single droplet fragmentation under varying accelerations.
Bartz, F.-O.; Guildenbecher, D. R.; Schmehl, R.; Koch, R.; Bauer, H.-J.; Sojka, P. E.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS'11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
Numerical studies of single drop impact onto a plane shallow and deep liquid pool.
Peduto, D.; Koch, R.; Morvan, H.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS'11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
Wake dynamics during aerodynamic fragmentation of liquid drops.
Flock, A.; Guildenbecher, D. R.; Chen, J.; Sojka, P. E.; Bauer, H.-J.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS'11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
Size and Refractive Index Measurements of Inhomogeneous Particles with a Solid Crust by Phase Doppler Anemometry.
Kontin, S.; Koch, R.; Bauer, H.-J.
2011. Proceedings of the 24th European Conference on Liquid Atomization and Spray Systems (ILASS'11), Estoril, Portugal, September 5-7, 2011, ILASS-Europe
Influence of Honeycomb Facings on the Through Flow and the Temperature Distribution of Labyrinth Seals.
Weinberger, T.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the XX International Symposium on Air Breathing Engines (ISABE'11), Gothenburg, Sweden, September 12-16, 2011; Vol. 3, 2184-2193, Curran Associates, Red Hook (NY)
The Impact of Geometry Variations on the Two-Phase Flows in Aero-Engine Bearing Chambers.
Kurz, W.; Dullenkopf, K.; Bauer, H.-J.
2011. Proceedings of the XX International Symposium on Air Breathing Engines (ISABE'11), Gothenburg, Sweden, September 12-16, 2011; Vol. 3, 2194-2201, Curran Associates, Red Hook (NY)
Modellierung des turbulenten Wärmetransports für Kanal- und Stufenströmungen.
Prause, J.; Von Terzi, D.; Schneider, H.; Bauer, H.-J.
2011. 60. Deutscher Luft- und Raumfahrtkongress, Tagungsband, Bremen, 27.-29. September 2011, 1 CD-Rom, Deutsche Gesellschaft f. Luft- u. Raumfahrt, Bonn
The Impact of Secondary Mean Vortices on Turbulent Separation in 3D Diffusers.
Terzi, D. von; Schneider, H.; Bauer, H.-J.
2011. High Performance Computing in Science and Engineering '10: Transactions of the High Performance Computing Center, Stuttgart 2010. Ed.: W. E. Nagel, 339-352, Springer, Berlin. doi:10.1007/978-3-642-15748-6_26
Impact of Secondary Vortices on Separation Dynamics in 3D Asymmetric Diffusers.
Schneider, H.; Terzi, D. von.; Bauer, H.-J.; Rodi, W.
2011. Direct and Large-Eddy Simulation VIII. Eighth DLES Workshop organized at Eindhoven University of Technology in July 2010. Ed.: H. Kuerten, 443-448, Springer Netherlands, Dordrecht. doi:10.1007/978-94-007-2482-2_70
DNS of unsteady heat transfer increase on a curved surface due to wake-induced turbulence.
Von Terzi, D.; Venema, L.; Bauer, H.-J.; Rodi, W.
2011. High Performance Computing in Science and Engineering '10 - Transactions of the High Performance Computing Center, Stuttgart (HLRS). Ed.: W. E. Nagel, 263-271, Springer, Berlin
Zeitschriftenaufsätze
Influence of internal parallel and v-shaped ribs on the discharge coefficient of a cylindrical film cooling hole.
Heneka, C.; Schulz, A.; Bauer, H.-J.
2011. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (7), 985-994. doi:10.1177/0957650911410926
Experimental Study of Surface Roughness Effects on a Turbine Airfoil in a Linear Cascade - Part II: Aerodynamic Losses.
Lorenz, M.; Schulz, A.; Bauer, H.-J.
2011. Journal of Turbomachinery, 134 (4), 041007/1-10. doi:10.1115/1.4003656
Turbulent Heat Transfer and Large Coherent Structures in Trailing-edge Cutback Film Cooling.
Schneider, H.; Von Terzi, D.; Bauer, H.-J.
2011. Flow, Turbulence and Combustion, 88 (1-2), 101-120. doi:10.1007/s10494-011-9379-3
A mechanism for control of turbulent separated flow in rectangular diffusers.
Schneider, H.; Von Terzi, D.; Bauer, H.-J.; Rodi, W.
2011. Journal of Fluid Mechanics, 687, 584-594. doi:10.1017/jfm.2011.395
DNS of heat transfer increase in a cylinder stagnation region due to wake-induced turbulence.
Venema, L.; Terzi, D. von; Bauer, H.-J.; Rodi, W.
2011. International Journal of Heat and Fluid Flow, 32 (3), 492-498. doi:10.1016/j.ijheatfluidflow.2011.03.003
2010
Proceedingsbeiträge
Entwicklung eines Smoothed Particle Hydrodynamics Codes zur numerischen Berechnung des Primärzerfalls an Brennstoffeinspritzdüsen.
Höfler, C.; Koch, R.; Bauer, H.-J.
2010. Deutscher Luft- und Raumfahrtkongress 2010 : Hamburg, 31. August - 2. September 2010 ; Tagungsband, CD-ROM, DGLR, Lilienthal-Oberth
Zeitschriftenaufsätze
A Finite Element Treatment of the Angular Dependency of the Even-Parity Equation of Radiative Transfer.
Becker, R.; Koch, R.; Modest, M.; Bauer, H.-J.
2010. Journal of Heat Transfer, 132 (2), 023404/1-13. doi:10.1115/1.4000233
High Dynamic Range Infrared Thermography by Pixelwise Radiometric Self Calibration.
Ochs, M.; Schulz, A.; Bauer, H.-J.
2010. Infrared Physics & Technology, 53 (2), 112-119. doi:10.1016/j.infrared.2009.10.002
Effects of Pilot Fuel and Liner Cooling on the Flame Structure in a Full Scale Swirl-Stabilized Combustion Setup.
Färber, J.; Koch, R.; Bauer, H.-J.; Hase, M.; Krebs, W.
2010. Journal of Engineering for Gas Turbines and Power, 132 (9), 091501/1-7. doi:10.1115/1.4000588
Large-Eddy Simulations of trailing-edge cutback film cooling at low blowing ratio.
Schneider, H.; Von Terzi, D.; Bauer, H.-J.
2010. International Journal of Heat and Fluid Flow, 31 (5), 767-775. doi:10.1016/j.ijheatfluidflow.2010.06.010
2009
Proceedingsbeiträge
Droplet Dispersion in an Unsteady Vortex Street.
Sinigersky, A.; Kovacs, A.; Koch, R.; Bauer, H.-J.
2009. Verbrennung und Feuerung - Tagung Bochum, 16. und 17. September 2009, 67-72, VDI-Verl., Düsseldorf
Effect of Internal Rib Configurations on the Discharge Coefficient of a 30-Degree Inclined Film Cooling Hole.
Heneka, C.; Schulz, A.; Bauer, H.-J.
2009. Turbine-09 Symposium, Antalya, Turkey, August 9 - 14, 2009. Ed.: T. W. Simon; Teil 2, 769-786, Begell House, Redding (Calif.)
Zeitschriftenaufsätze
Identification of droplet burning modes in lean, partially prevaporized swirl-stabilized spray flames.
Beck, C. H.; Koch, R.; Bauer, H.-J.
2009. Proceedings of the Combustion Institute, 32 (2), 2195-2203
A Novel Calibration Method for an Infrared Thermography System Applied to Heat Transfer Experiments.
Ochs, M.; Horbach, T.; Schulz, A.; Koch, R.; Bauer, H.-J.
2009. Measurement Science and Technology, 20 (7), 075103/1-9
Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part II - Model Validation and Benchmarking.
Stripf, M.; Schulz, A.; Bauer, H.-J.; Wittig, S.
2009. Journal of Turbomachinery, 131 (3), 031017/1-11
Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part I - Model Formulations.
Stripf, M.; Schulz, A.; Bauer, H.-J.; Wittig, S.
2009. Journal of Turbomachinery, 131 (3), 031016/1-10
Acoustic Emission Testing of Highly Loaded Combustor Liner Tiles for Gas Turbines.
Mende, C.; Heits, E.; Schulz, A.; Bauer, H. J.; Wanner, A.
2009. OMMI, 6 (1)
Buchaufsätze
Teilprojekt GT 7 - Einfluss realer turbinentypischer Rauigkeiten auf das äußere Wärmeübergangsverhalten und die aerodynamischen Verluste von Turbinenschaufeln.
Lorenz, M.; Stripf, M.; Schulz, A.; Bauer, H.-J.
2009. Abschlussbericht Forschungsinitiative "Kraftwerke des 21. Jahrhunderts (KW21)" : 01.07.2004 bis 31.12.2008.; Bd. 2, 571-598, Abayfor, München
Teilprojekt GV 9 - Pilotierte Vormischflammen.
Färber, J.; Koch, R.; Bauer, H.-J.
2009. Abschlussbericht Forschungsinitiative "Kraftwerke des 21. Jahrhunderts (KW21)" : 01.07.2004 bis 31.12.2008; Bd. 2, 764-788, Abayfor, München
2008
Proceedingsbeiträge
Bürstendichtungen: Anstreifverhalten und Leckagebestimmung von Bürstendichtungen in Turbomaschinen. Zwischenbericht über das Vorhaben Nr. 922.
Pfefferle, D.; Bauer, H.-J.; Dullenkopf, K.
2008. Informationstagung Turbomaschinen - Herbsttagung 2008. Abschluss- und Zwischenberichte der Forschungsstellen, Bremen, Deutschland, 18. September 2008, Forschungsvereinigung Verbrennungskraftmaschinen, Frankfurt
Zeitschriftenaufsätze
Numerical Investigation of the Time Scales of Single Droplet Burning.
Beck, C. H.; Koch, R.; Bauer, H.-J.
2008. Flow, Turbulence and Combustion, 82 (4), 571-598
Investigation of the Effect of Incomplete Droplet Prevaporization on NOx Emissions in LDI Combustion Systems.
Beck, C.; Koch, R.; Bauer, H.-J.
2008. Journal of Engineering for Gas Turbines and Power, 130 (5), 051504/1-8
2007
Proceedingsbeiträge
Transient effects of single droplet burning.
Beck, C.; Koch, R.; Bauer, H.-J.
2007. Proceedings of the 2nd ECCOMAS Thematic Conference on Computational Combustion. Ed.: D. Roekaerts, 1 CD-Rom, TU Delft, Delft
Zeitschriftenaufsätze
Unsteady Flame and Flow Field Interaction of a Premixed Model Gas Turbine Burner.
Schildmacher, K.-U.; Hoffmann, A.; Selle, L.; Koch, R.; Schulz, C.; Bauer, H.-J.; Poinsot, T.; Krebs, W.; Prade, B.
2007. Proceedings of the Combustion Institute, 31 (2), 3197-3205
Roughness and Secondary Flow Effects on Turbine Vane External Heat Transfer.
Stripf, M.; Schulz, A.; Bauer, H.-J.
2007. Journal of propulsion and power, 23 (2), 283-291
2006
Zeitschriftenaufsätze
Experimental Characterization of Premixed Flame Instabilities of a Model Gas Turbine Burner.
Schildmacher, K.-U.; Koch, R.; Bauer, H.-J.
2006. Flow, Turbulence and Combustion, 76 (2), 177-197
Numerical Simulation of a Precessing Vortex Breakdown.
Jochmann, P.; Sinigersky, A.; Hehle, M.; Schäfer, O.; Koch, R.; Bauer, H.-J.
2006. International Journal of Heat and Fluid Flow, 27 (2), 192-203
Detached Eddy Simulation of Film Cooling Performance on the Trailing Edge Cutback of Gas Turbine Airfoils.
Martini, P.; Schulz, A.; Bauer, H.-J.; Whitney, C. F.
2006. Journal of Turbomachinery, 128 (2), 292-299
DNS of droplet-vortex interaction with a Karman vortex street.
Burger, M.; Schmehl, R.; Koch, R.; Wittig, S.; Bauer, H.-J.
2006. International journal of heat and fluid flow, 27 (2), 181-191
2005
Proceedingsbeiträge
Phasenselektive Bestimmung von Tropfengeschwindigkeiten und -Durchmessern in einer Zweiphasenströmung mit Hilfe eines angepassten PDA-Verfahrens.
Ochs, M.; Hehle, M.; Dullenkopf, K.; Bauer, H.-J.
2005. Motto: Luft- und Raumfahrt - Grenzen überwinden, Horizonte erweitern. Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005, DGLR, Bonn
Zerstäubungsverhalten von Airblastdüsen bei oszillierenden Strömungen.
Müller, A.; Hehle, M.; Koch, R.; Bauer, H.-J.
2005. Verbrennung und Feuerung, Tagung Braunschweig, 21. und 22. September 2005, 249-258, VDI-Verlag, Düsseldorf
Zeitschriftenaufsätze
Investigation of secondary droplet characteristics produced by an isooctane drop chain impact onto a heated piston surface.
Richter, B.; Dullenkopf, K.; Bauer, H.-J.
2005. Experiments in Fluids, 39 (2), 351-363
Stereo PIV-Measurements in an Enclosed Rotor-Stator System with Pre-Swirled Cooling Air.
Bricaud, C.; Richter, B.; Dullenkopf, K.; Bauer, H.-J.
2005. Experiments in Fluids, 39 (2), 202-212
Buchaufsätze
Predictions of transient fuel spray phenomena in the intake port of a SI-engine.
Burger, M.; Schmehl, R.; Koch, R.; Wittig, S.; Bauer, H.-J.
2005. Emission control and fuel economy for port and direct injected SI engines. Ed.: J. H. Johnson, -, Soc. of Automotive Engineers, Warrendale (PA)
2004
Zeitschriftenaufsätze
New low emission strategies and combustor designs for civil aeroengine applications.
Bauer, H.-J.
2004. Progress in Computational Fluid Dynamics, 4 (3/4/5), 130 - 142
1998
Zeitschriftenaufsätze
DISC - an efficient method for the discretization of convection on unstructured grids.
Rexroth, C.-H.; Bauer, H.-J.; Wittig, S.
1998. Aerosp. sci. and technol. 6 (1997) S. 405-411
Buchaufsätze
Atomization and spray propagation in gas turbine combustors.
Maier, G.; Meier, R.; Willmann, M.; Kneer, R.; Himmelsbach, J.; Bauer, H.-J.; Wittig, S.
1998. In: Abschlußkolloquium, Sonderforschungsbereich 167 "Hochbelastete Brennräume - Stationäre Gleichdruckverbrennung", Universität Karlsruhe, Karlsruhe 1998
1996
Zeitschriftenaufsätze
Soot formation in a shock tube under elevated pressure conditions.
Kellerer, H.; Mueller, A.; Bauer, H.-J.; Wittig, S.
1996. Combust. sci. and technol. 113/114 (1996) S. 67-80
Advanced gas turbine cycles with two-stage combustion.
Wittig, S.; Bauer, H.-J.; Meisl, J.; Sieger, K.
1996. VGB Kraftwerkstech. 75 (1995) Engl. issue S. 444-448
Buchaufsätze
Numerical study of bicomponent droplet vaporization in a high pressure environment.
Stengele, J.; Bauer, H.-J.; Wittig, S.
1996. In: 41st ASME Gas Turbine and Aeroengine Congress, Birmingham, UK 1996. (ASME paper. 96-GT-442.)
A comparative study of two low-Reynolds number k-epsilon turbulence models for recirculating flows with and without heat transfer.
Giebert, D.; Bauer, H.-J.; Wittig, S.
1996. In: Proceedings of the 3rd International Symposium on Engineering Turbulence Modelling and Measurements, Heraklion-Crete, Greece 1996. Ed.: W. Rodi. Amsterdam 1996. (Engineering turbulence modelling and experiments. 3.)
1995
Zeitschriftenaufsätze
Fortschrittliche Gasturbinenprozesse mit zweistufiger Verbrennung.
Wittig, S.; Bauer, H.-J.; Meisl, J.; Sieger, K.
1995. VGB Kraftwerkstech. 75 (1995) S. 503-508
Buchaufsätze
Soot formation in a shock tube under elevated pressure conditions.
Kellerer, H.; Bauer, H.-J.; Wittig, S.
1995. In: Joint Meeting of the French and German Sections of the Combustion Institute, Mulhouse, France 1995
Soot formation from rich hydrocarbon oxidation under elevated pressure conditions.
Kellerer, H.; Bauer, H.-J.; Wittig, S.
1995. In: 20th International Symposium on Shock Waves, ISSW20, Pasadena, USA 1995
Reduzierung der NOsub(x)-Emissionen durch zweistufige Verbrennungsführung unter erhöhten Drücken.
Meisl, J.; Bauer, H.-J.; Wittig, S.
1995. In: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). 1995. Bd. 2. Bonn 1995. S. 961-968
Untersuchungen des Druckeinflusses auf die NOsub(x)-Emissionen aus Gasturbinenbrennkammern mit zweistufiger Verbrennungsführung.
Meisl, J.; Bauer, H.-J.; Wittig, S.
1995. In: Verbrennung und Feuerungen. 17. Deutscher Flammentag. Düsseldorf 1995. (VDI-Berichte. 1193.)
Experimentelle Untersuchungen einer LPP- Gasturbinenbrennkammer - Tropfenausbreitung und Brennkammeremissionen.
Maier, G.; Bauer, H.-J.; Wittig, S.
1995. In: Verbrennung und Feuerungen. 17. Deutscher Flammentag. Düsseldorf 1995. (VDI-Berichte. 1193.)
In-Situ-Charakterisierung des Sprühstrahls in einer druckbeaufschlagten Gasturbinen- Brennkammer - Einfluß von Druck und Luftmassenstrom.
Maier, G.; Bauer, H.-J.; Wittig, S.
1995. In: 11. TECFLAM-Seminar Verbrennungsdiagnostik und Prozeßkontrolle, Heidelberg 1995. S. 71-81
Zweiphasenströmungen unter brennkammertypischen Bedingungen - Vergleich experimenteller Daten mit Simulationsrechnungen.
Willmann, M.; Bauer, H.-J.; Wittig, S.
1995. In: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). 1995. Bd. 1. Bonn 1995. S. 225-234
A parallel finite-volume algorithm for the prediction of three-dimensional turbulent flows with heat-release.
Kurreck, M.; Bauer, H.-J.; Wittig, S.
1995. In: 8th International Symposium on Transport Phenomena in Combustion, ISTP-8, San Francisco, Calif. 1995
Shock tube investigations of rich hydrocarbon oxidation under elevated pressure conditions.
Kellerer, H.; Mueller, A.; Bauer, H.-J.; Wittig, S.
1995. In: Symposium on Fire and Combustion Systems 1995, ASME IMECE, San Francisco, Calif. 1995
Soot formation in a shock tube under elevated pressure conditions.
Kellerer, H.; Mueller, A.; Bauer, H.-J.; Wittig, S.
1995. In: 15th International Colloquium on Dynamics of Explosion and Reactive Systems, ICDERS, Boulder, Colo. 1995
Three-dimensional spectral radiative heat transfer calculation in a cylindrical model combustor using the discrete ordinates method.
Krebs, W.; Koch, R.; Bauer, H.-J.; Wittig, S.
1995. In: 1st International Symposium on Radiative Heat Transfer, ICHMT, Kusadasi, Turkey 1995
Local measurements in a three-dimensional jet-stabilized model combustor.
Bauer, H.-J.; Eigenmann, L.; Scherrer, B.; Wittig, S.
1995. In: International Gas Turbine and Aeroengine Congress & Exposition, Houston, Tx. 1995. Paper no. 95-GT-71
1994
Buchaufsätze
Effect of turbulence on radiative heat transfer inside a model combustor.
Krebs, W.; Koch, R.; Bauer, H.-J.; Kneer, R.; Wittig, S.
1994. In: Heat transfer radiating and combusting systems 2, Saluggia (Italy) 1994. S. 349-362. (Eurotherm seminar. 37.)
1989
Zeitschriftenaufsätze
Gesichtspunkte der numerischen Simulation turbulenter Stroemungen in brennkammertypischen Konfigurationen.
Noll, B.; Bauer, H.-J.; Wittig, S.
1989. Z. f. Flugwiss. u. Weltraumforsch. 13 (1989) S. 178-187
Buchaufsätze
Zwei- und dreidimensionale Stroemungsvorgaenge. Entwicklung d. Stroemungszustandes in Brennkammern bei komplexer Geometrie.
Noll, B.; Bauer, H.-J.; Wittig, S.
1989. In: Forschungsbericht. Sonderforschungsbereich 167 "Hochbelastete Brennraeume - Stationaere Gleichdruckverbrennung", Universitaet Karlsruhe (TH). 1987-1989. Karlsruhe 1989. S. 271-301